Header

FP3 "Bullion" CBG pickup

The Flatpup FP3 Humbucker is designed for three-string instruments. This guitar pickup is extremely flat - it normally fits between the strings and the top. No big holes to sink the pickup, just a small hole to pass the wires. The frames are made of thin brass tin. It is basically a wrap-pocket, into which the pickup is shifted. The lateral sides are closed by wooden covers.

Please note:

  • The recommended outer string spacing is 25mm / 1". If it's wider, you should better take the broader FP 4.
  • Mounting: either with a double-stick cushion tape (standard) or screw mount. Please advise in your order.
  • the housing has to be connected to ground

Flatpup FP3 "Bullion" tape-mount (standard)

  • height: 6 mm
  • ~38mm wide x 40mm broad
  • no lateral wooden closures, therefore less wide
  • max. string distance: 25mm / 1"
  • The coils are humbucker-wound
  • Product and shipping info at the FAQ.
  • Price <here>
 Flatpup FP3 "Bullion" tape-mount
  • height: 5mm
  • ~45mm wide x 40mm broad
  • wooden lateral closures to pass the screws
  • max. string distance: 25mm / 1"
  • The coils are humbucker-wound
  • 4 brass screws (included)
  • Product and shipping info at the FAQ.
  • Price <here>

The "Bullion" Flatpup Humbuckers are available for instruments with a different number of strings: starting from an FP3 up to an FP10 with a range of max 95mm.